駕奇 Jia Qi
交通工具 Automotive Design
周雨宣 / 黃悅慈 / 劉伊雅
指導教授 : 楊朝陽 / 胡哲嚴
摘要 Introduction
清洗身體是海灘活動後必要的，除保持個人衛生外，亦能減少對環境的負擔。駕奇是一台專為喜歡獨旅的海上活動愛好者所設計的交通工具，近年來人們更重視屬於自己的時間和空間，單人座椅的設計，除了可以享受和自己獨處的時間外，大型收納空間足以放置充氣式衝浪板及可拆式槳板。待結束海上活動後，可利用水箱中的水清洗身上的沙子並繼續旅程。
Body washing after beach activities is necessary to maintain personal hygiene and reduce environmental burden. Jet Ski is a solo watercraft designed for independent water sports enthusiasts. Its single-seater design allows for personal time and large storage space for inflatable surfboards and detachable paddles. Water from the Jet Ski's tan
設計理念 - Design Concept
駕奇是一款為海上活動愛好者設計的電動摩托車，其特色在於搭載了水箱，讓使用者在結束海上活動後能夠方便地清洗身體。我們從名流150中汲取靈感，簡約年輕的設計風格能夠讓騎乘者在出遊時能享受愉悅的時光。我們希望駕奇能夠成為一款讓人難以忘懷的電動摩托車，締造屬於自己的傳奇故事。
"Jia Qi" is an electric motorcycle designed for sea sports enthusiasts, featuring a water tank that allows users to conveniently clean themselves after their sea activities. Drawing inspiration from the minimalist and youthful design of the "FREEWAY150" motorcycle, riders can enjoy a pleasant and memorable journey. We aspire for "Jia Qi" to become an unforgettable electric motorcycle that creates its own legendary story.
產品介紹 - Product Description
A 前置物綁帶：可放置充氣式SUP或者防水背包。
B 水箱模組：抽水馬達將20公升的水送至蓮蓬頭可以清潔2-3分鐘。
C 椅墊和車身中空：可放置細長型的划槳等。
D 後置物簍空：骨架和綁帶的設計方便清潔。
E 換電電池：配置一顆ionex電池。
A. Front Item Strap: Can store inflatable SUP or waterproof backpack.
B. Water Tank Module: The water pump motor sends 20 liters of water to the showerhead for 2-3 minutes of cleaning.
C. Between the seat cushion and the body: Can store narrow paddles, etc.
D. Rear Item Compartment: Designed with a framework and strap for easy cleaning.
E. Battery Replacement: Equipped with ionex battery.
使用流程 Operation Procedure
首先將裝備放到置物空間、將水箱裝滿水，接著騎車前往秘境，到達秘境後，開始組裝裝備，以SUP為例，有充氣槳板、組裝划槳、換上泳衣及救生衣...等，接著開始盡情享受海上活動，結束活動後簡單清潔四肢及毛髮上沾黏的砂礫，剩餘的水可以清潔裝備，最後結束收好裝備前往下個地點活動。
Store equipment and fill the water tank. Ride to a secret spot, assemble SUP equipment (inflate paddle board, assemble paddle, put on swimsuit and life jacket). Enjoy water activity, clean limbs/hair/sand, clean equipment with remaining water, pack up and move to the next location.
製作過程 - Making Process
我們先定位車子的三角點後製作骨架，再將車身的幾何包覆在骨架外，形成最初的外型。 初版完成後，我們發現紙箱的結構並不足以承受車身的重量，於是製作二版時，在輪子的部分進行強化，並進行較細部的外觀及置物空間規劃，第二版的修改，降低了模型極大的耗損機率，而老師建議第三代模型可以使用鐵管製作骨架，更能模擬真實機車的結構與樣貌。
We located the car's key points and made a skeleton, wrapped the car's geometry around it to create the initial shape. After the first version, we reinforced the wheel section and improved appearance and storage. The second version reduced the probability of damage. The teacher suggested using iron pipes for the third-generation model to simulate a real motorcycle's structure and appearance.
Meet The Team
指導教授
楊朝陽 Chao-Yang Yang